Hypertherm 023404 Cable

Part Description

The Hypertherm 023404 cable is a 25-foot cable that connects the Power supply to the Work Table. It is a shielded cable with a PVC jacket. The cable has a male connector on one end and a female connector on the other end.

Specifications

• Length: 25 feet
• Jacket Material: PVC
• Connector Type: Male and Female
• Shielded: Yes

Applications

The Hypertherm 023404 cable is used to connect the Power supply to the Work Table in Hypertherm plasma cutting systems.

Installation

To install the Hypertherm 023404 cable, follow these steps:

1. Disconnect the power supply from the Work Table.
2. Connect the male connector of the cable to the female connector on the Power supply.
3. Connect the female connector of the cable to the male connector on the Work Table.
4. Reconnect the power supply to the Work Table.

Troubleshooting

If you are having problems with the Hypertherm 023404 cable, check the following:

• Make sure that the cable is properly connected to the Power supply and the Work Table.
• Check the cable for damage.
• If the cable is damaged, replace it with a new one.

Conclusion

The Hypertherm 023404 cable is an important part of the Hypertherm plasma cutting system. It is important to keep the cable in good condition to ensure that the system operates properly.