Hypertherm 005074 Inductive Probe Assembly

Overview

The Hypertherm 005074 Inductive Probe Assembly is a replacement part for Hypertherm plasma cutting systems. It is used to detect the presence of metal and adjust the cutting height accordingly. The assembly includes a sensor, a cable, and a mounting bracket.

Specifications

• Brand: Hypertherm
• Part number: 005074
• Part description: Inductive Probe Assembly
• Sensor type: Inductive
• Cable length: 6 feet
• Mounting bracket: Included

Installation

The Hypertherm 005074 Inductive Probe Assembly can be installed by following these steps:

1. Disconnect the power from the plasma cutting system.
2. Remove the old inductive probe assembly.
3. Install the new inductive probe assembly in the same location.
4. Reconnect the power to the plasma cutting system.
5. Adjust the cutting height as needed.

Troubleshooting

If the Hypertherm 005074 Inductive Probe Assembly is not working properly, there are a few things you can check:

• Check the sensor. The sensor should be clean and free of debris. If the sensor is damaged, it will need to be replaced.
• Check the cable. The cable should be free of kinks and breaks. If the cable is damaged, it will need to be replaced.
• Check the mounting bracket. The mounting bracket should be securely fastened to the plasma cutting system. If the mounting bracket is loose, it can cause the sensor to malfunction.

If you have checked all of these things and the Hypertherm 005074 Inductive Probe Assembly is still not working properly, you may need to contact Hypertherm for assistance.

Conclusion

The Hypertherm 005074 Inductive Probe Assembly is an important part of your plasma cutting system. By following these steps, you can ensure that the assembly is properly installed and working correctly.