Hypertherm 004663 Nozzle Wrench

Product Description

The Hypertherm 004663 Nozzle Wrench is a tool used to remove and install nozzles on Hypertherm plasma cutting torches. It is a small, lightweight tool that is easy to use. The wrench has a 1/2-inch hex drive and a 1-inch spanner. It is made of durable materials and is built to last.

Features

• Removes and installs nozzles on Hypertherm plasma cutting torches
• 1/2-inch hex drive
• 1-inch spanner
• Durable materials
• Built to last

Benefits

• Easy to use
• Lightweight
• Durable
• Built to last

Applications

The Hypertherm 004663 Nozzle Wrench is used to remove and install nozzles on Hypertherm plasma cutting torches. It is a versatile tool that can be used in a variety of applications, including:

• Automotive repair
• Metal fabrication
• Construction
• Mining
• Shipbuilding

How to Use

To use the Hypertherm 004663 Nozzle Wrench, follow these steps:

1. Turn off the power to the plasma cutting torch.
2. Allow the torch to cool down.
3. Remove the nozzle cap.
4. Place the wrench over the nozzle.
5. Turn the wrench counterclockwise to loosen the nozzle.
6. Remove the nozzle.
7. To install a new nozzle, reverse the steps above.

Safety Precautions

When using the Hypertherm 004663 Nozzle Wrench, follow these safety precautions:

• Wear safety glasses.
• Wear gloves.
• Be aware of the location of electrical wires and other hazards.
• Do not use the wrench if it is damaged.

Troubleshooting

If you are having trouble using the Hypertherm 004663 Nozzle Wrench, here are some troubleshooting tips:

• Make sure that the wrench is the correct size for the nozzle.
• Make sure that the wrench is properly seated on the nozzle.
• Apply even pressure to the wrench.
• If the nozzle is still stuck, try using a penetrating oil.

Conclusion

The Hypertherm 004663 Nozzle Wrench is a versatile and durable tool that is essential for any Hypertherm plasma cutting torch owner. It is easy to use and can be used in a variety of applications.

Similar Parts

027194
Wrench, 3/4" Nozzle

027102
Electrode Wrench

104119
Consumable Wrench HPR

104269
SPANNER WRENCH: 2 INCH DIAMETER FOR HPR

104879
SPANNER WRENCH 2.25 INCH DIAMETER X 6.25 INCH LONG XPR SYSTEMS

220903
USE PN: 420044 NOZZLE:HyPro2000 200A AIR PART DISCONTINUED MAXPro Nozzle This nozz...

220898
NOZZLE:HPR260 XD 260A MS BEVEL

220892
NOZZLE:HyPro2000 130A AIR

220893
NOZZLE:HyPro2000 130A O2

220930
NOZZLE: PMX FINE CUT