Hypertherm T105-8218 Shield Cup

Description

The Hypertherm T105-8218 Shield Cup is a replacement part for Hypertherm plasma cutting torches. It is made of a durable material that can withstand the high temperatures and pressures generated by the plasma cutting process. The shield cup helps to protect the torch tip from damage and ensures that the plasma arc is properly formed.

Specifications

• Brand: Hypertherm
• Part number: T105-8218
• Part description: Shield Cup
• Material: Copper
• Dimensions: 1.5" OD x 1.25" ID x 1.0" H
• Weight: 0.5 lbs

Compatibility

The Hypertherm T105-8218 Shield Cup is compatible with the following Hypertherm plasma cutting torches:

• Powermax30 XP
• Powermax45 XP
• Powermax65 XP
• Powermax85 XP
• Powermax105 XP
• Powermax125 XP

Installation

To install the Hypertherm T105-8218 Shield Cup, follow these steps:

1. Remove the old shield cup by unscrewing it from the torch tip.
2. Clean the torch tip and the threads of the shield cup with a wire brush.
3. Apply a small amount of anti-seize compound to the threads of the shield cup.
4. Screw the shield cup onto the torch tip until it is snug.

Maintenance

The Hypertherm T105-8218 Shield Cup should be inspected regularly for signs of wear or damage. If the shield cup is cracked or damaged, it should be replaced immediately. To clean the shield cup, simply wipe it off with a dry cloth.

Troubleshooting

If you are experiencing problems with your Hypertherm plasma cutting torch, the shield cup may be the cause. Here are some troubleshooting tips:

• Check the shield cup for cracks or damage. If the shield cup is damaged, replace it.
• Make sure the shield cup is properly installed. The shield cup should be screwed on tightly until it is snug.
• Clean the shield cup and the torch tip. A dirty shield cup or torch tip can cause the plasma arc to wander or become unstable.
• If you are still experiencing problems, contact Hypertherm technical support for assistance.