Hypertherm 220198 130 Amp Shield

Product Description

The Hypertherm 220198 130 Amp Shield is a replacement part for Hypertherm plasma cutters. It is made of durable materials and is designed to protect the torch from damage. The shield is easy to install and can be replaced quickly and easily.

Specifications

• Brand: Hypertherm
• Part number: 220198
• Part description: 130 Amp Shield
• Material: Stainless steel
• Dimensions: 3.5" x 2.5" x 1.5"
• Weight: 0.5 lbs

Features

• Protects the torch from damage
• Easy to install and replace
• Durable materials for long life

Compatibility

The Hypertherm 220198 130 Amp Shield is compatible with the following Hypertherm plasma cutters:

• Powermax30 XP
• Powermax45 XP
• Powermax65 XP
• Powermax85 XP
• Powermax105 XP
• Powermax125 XP

Installation

To install the Hypertherm 220198 130 Amp Shield, follow these steps:

1. Turn off the plasma cutter and disconnect the power cord.
2. Remove the old shield by unscrewing the two screws that hold it in place.
3. Place the new shield over the torch and align the screw holes.
4. Insert the two screws and tighten them until the shield is securely in place.

Maintenance

The Hypertherm 220198 130 Amp Shield should be inspected regularly for signs of wear or damage. If the shield is damaged, it should be replaced immediately. To clean the shield, use a mild detergent and water. Do not use harsh chemicals or abrasives, as these can damage the shield.

Troubleshooting

If you are experiencing problems with your Hypertherm plasma cutter, the shield may be the cause. Check the shield for signs of wear or damage. If the shield is damaged, it should be replaced. If the shield is not damaged, there may be another problem with the plasma cutter. Refer to the plasma cutter's manual for troubleshooting tips.