Monthly Basis
What's happening this month?

Hypertherm 127278 ASSEMBLY:TEST PEN HOLDER

Description

The Hypertherm 127278 ASSEMBLY:TEST PEN HOLDER is a component of the Hypertherm Powermax plasma cutting system. It is used to hold the test pen in place while testing the system. The test pen holder is made of durable plastic and is designed to withstand the harsh conditions of the plasma cutting process.

Specifications

  • Brand: Hypertherm
  • Part number: 127278
  • Part description: ASSEMBLY:TEST PEN HOLDER
  • Material: Plastic
  • Dimensions: 2.5" x 1.5" x 0.5"
  • Weight: 0.5 oz

Features

  • Holds the test pen in place while testing the Hypertherm Powermax plasma cutting system
  • Made of durable plastic to withstand the harsh conditions of the plasma cutting process
  • Easy to install and remove

Applications

The Hypertherm 127278 ASSEMBLY:TEST PEN HOLDER is used in the following applications:

  • Plasma cutting
  • Welding
  • Metal fabrication

Installation

To install the Hypertherm 127278 ASSEMBLY:TEST PEN HOLDER, follow these steps:

  1. Turn off the power to the plasma cutting system.
  2. Remove the test pen from the test pen holder.
  3. Insert the test pen holder into the test pen port on the plasma cutting system.
  4. Tighten the test pen holder until it is secure.
  5. Turn on the power to the plasma cutting system.

Removal

To remove the Hypertherm 127278 ASSEMBLY:TEST PEN HOLDER, follow these steps:

  1. Turn off the power to the plasma cutting system.
  2. Remove the test pen from the test pen holder.
  3. Loosen the test pen holder until it is no longer secure.
  4. Remove the test pen holder from the test pen port on the plasma cutting system.
  5. Turn on the power to the plasma cutting system.

Troubleshooting

If you are experiencing problems with the Hypertherm 127278 ASSEMBLY:TEST PEN HOLDER, try the following troubleshooting steps:

  • Check that the test pen holder is properly installed.
  • Check that the test pen is properly inserted into the test pen holder.
  • Check that the test pen port on the plasma cutting system is clean and free of debris.
  • If the problem persists, contact Hypertherm customer support for assistance.

Safety Precautions

When using the Hypertherm 127278 ASSEMBLY:TEST PEN HOLDER, be sure to follow these safety precautions:

  • Wear protective clothing and equipment, including gloves, eye protection, and a face shield.
  • Keep the test pen holder away from children and pets.
  • Do not use the test pen holder in wet or damp conditions.
  • Do not use the test pen holder if it is damaged.
  • If you experience any problems with the test pen holder, discontinue use and contact Hypertherm customer support for assistance.

Similar Parts

228569
KIT:PRESSURE TEST GUAGES HPR XD

128648
Kit: HD4070 PC104 FS Test

428715
KIT:ETHERCAT TEST PRINTED CIRCUIT BOARD

228520
HPR 130 XD Torch Assembly w/ 220790 torch mounting sleeve assembly: Long, 248 mm 9.75 in

228521
260XD Torch Assembly w/ 220790 torch mounting sleeve assembly: Long, 248 mm 9.75 in

228467
KIT:PUSHBUTTON SWITCH ASSEMBLY EDGE PRO GREEN

228468
KIT:PUSHBUTTON SWITCH ASSEMBLY EDGE PRO RED

228469
KIT:TOGGLE SWITCH ASSEMBLY EDGE PRO

228576
KIT:PRINTED CIRCUIT BOARD ASSEMBLY PLASMA INTERFACE

228451
KIT:PRINTED CIRCUIT BOARD ASSEMBLY MCC-SIX AXIS