Hypertherm 073219 Motor Valve Console, HT2000
Product Description
The Hypertherm 073219 Motor Valve Console is a critical component of the HT2000 plasma cutting system. The console controls the flow of gas and water to the plasma torch, and it also provides electrical power to the torch. The console is made of durable materials and is designed to withstand the harsh conditions of plasma cutting.
Features
- Controls the flow of gas and water to the plasma torch
- Provides electrical power to the torch
Specifications
- Dimensions: 12" x 8" x 4"
- Weight 4 lbs
- Power Requirements: 115 VAC, 60 Hz, 10 A
Installation
The Hypertherm 073219 Motor Valve Console should only be replaced by a qualified service technician.
Troubleshooting
If the Hypertherm 073219 Motor Valve Console is not functioning properly, it may be necessary to replace the console.
Safety Precautions
- Disconnect power before servicing the console
- Only qualified personnel should work on this equipment
- Follow all safety precautions when working with plasma cutting equipment
Similar Parts
023593
Motor Valve Console Cable - PS to Motor Valve Console 100 ft.
023594
Cable Between Motor Valve Console and Power Supply, HT2000, 150 ft.
023967
Cable between Motor Valve Console and Power Supply, 1x3/4x1 HT2000, 120 ft.
024028
Plasma preflow gas hosing, from gas console to motor valve console blue hose, 25 ft.
024321
Plasma cut flow gas hosing, gas console to motor valve console blue hose, 25 ft.
028624
Leads between Gas console and Motor Valve console, 20 ft.
123185
Off Valve to motor valve cable 4 X 2
229965
SOLENOID VALVE:06151 XPR CONSOLE SELECTION VALVE TESTED
028684
Shield gas Hose Set - Gas Console / RHF Console, HT2000, 15 ft.
123078
Cable between Motor Valve Consol and PS, 110 ft.